Controler Question?

RMiller · 05-24-2007

I have installed the system on my Durama Diesel. I have one m14 Nozzle and one M5 Nozzle, I am wating for the Y connector and I have the M14 nozzle hooked up now.
My question is how the right dial on the controller effects operation? I have a boost gage and see how the voltage seeting on the right dial sets at what point the pump starts.
When the pumps comes on around 15 Lbs boost and I reach 25Lbs boost the last light starts flashing.
Does that tell me that the system has reached max pressure?
Does turning the dial up incress pressure?
What is the best setting on the second dial for M14 and M5 Nozzles?
Thanks RMiller

dvldoc · 05-24-2007

The right dial or (FULL) Control, Adjust how fast your pump ramps up to full psi and effects overall out put pressure over your boost range. Most TD's don't need to much ramping. And it also depends on how much you want your rig to drink.

For the street -15psi is a good start point, I would turn the full side down to about 20-22psi and play with it from there. It's all about how much hp you want and when you want it to start coming on and how much solution you want to use.

RMiller · 05-24-2007

I get the second nozzle hooked up I will Play with it.
I have a Edge chip with a Attitude monitor, it can masure 0-60 and 1/4 mile times.
I will let people know the differance.
RMiller

05-24-2007	#1 (permalink)
RMiller Water Injection Newb Year: 2001 Make: GMC Model: 2500HD diesel Join Date: Apr 2007 Posts: 6	Controler Question? I have installed the system on my Durama Diesel. I have one m14 Nozzle and one M5 Nozzle, I am wating for the Y connector and I have the M14 nozzle hooked up now. My question is how the right dial on the controller effects operation? I have a boost gage and see how the voltage seeting on the right dial sets at what point the pump starts. When the pumps comes on around 15 Lbs boost and I reach 25Lbs boost the last light starts flashing. Does that tell me that the system has reached max pressure? Does turning the dial up incress pressure? What is the best setting on the second dial for M14 and M5 Nozzles? Thanks RMiller

05-24-2007	#2 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,058	Re: Controler Question? The right dial or (FULL) Control, Adjust how fast your pump ramps up to full psi and effects overall out put pressure over your boost range. Most TD's don't need to much ramping. And it also depends on how much you want your rig to drink. For the street -15psi is a good start point, I would turn the full side down to about 20-22psi and play with it from there. It's all about how much hp you want and when you want it to start coming on and how much solution you want to use. __________________ Currently deployed to Ramadi 1 battalion 12th Marines Task Force MP

05-24-2007	#3 (permalink)
RMiller Water Injection Newb Year: 2001 Make: GMC Model: 2500HD diesel Join Date: Apr 2007 Posts: 6	Re: Controler Question? I get the second nozzle hooked up I will Play with it. I have a Edge chip with a Attitude monitor, it can masure 0-60 and 1/4 mile times. I will let people know the differance. RMiller