[Rote8]

How does the "DO1" "DO2" nozzle sizing convert to gallons or milliliters per minute?

[dvldoc]

D01 = 1GPH@100psi or 63. So the number after our trademark is the GPH rate of the nozzle at 100psi.


Here is a good conversion site to help you out plus the actual flows of the nozzles. Flow Conversion - FREE Unit Converter


Never did bench test a M1 but it should be around 1.8gph at 235psi with 13.25v to the pump.

M2 230psi = 2.9GPH
M3 225psi = 4.2GPH
M4 215psi = 5.5GPH
M5 190psi = 6.7GPH
M7 180psi = 9.0GPH
M10 170psi = 12.5GPH

Hope that helps you out.

[tweak'e]

assuming its US gallons converting to metric it is.....

M2 230psi = 11 liter/hour
M3 225psi = 16 liter/hour
M4 215psi = 21 liter/hour
M5 190psi = 25 liter/hour
M7 180psi = 34 liter/hour
M10 170psi = 47 liter/hour

D01 @100psi = 3.8 liter/hour
D02 @100psi = 7.6 liter/hour
D03 @100psi = 11 liter/hour
D04 @100psi = 15 liter/hour
D05 @100psi = 19 liter/hour
D07 @100psi = 26.5 liter/hour
D10 @100psi = 38 liter/hour