Got ahold of KEN on the controllers (basic design pic added)

dvldoc · 04-18-2005

Well finally he will have everything sent to me by Friday. It's been a long wait and I mean long for you guys. And I do apoligize but it's out of my hands until I get the controllers. I will give a $100 upgrade to the new Stage 2 controllers due out next month to all who have purchased a kit.

copgtp · 04-18-2005

Bilal, you are my hero dammit!!!

BILAL FOR PRESIDENTE!!!!!!!!!

Timberwarp · 04-19-2005

I can't wait to see the pics of the new controller, I am tempted to buy one but not til I see one first. ;)

NeilsGTP · 04-19-2005

Wow, thanks Bilal!!

dvldoc · 04-19-2005

Here's a few specs on the contoller this is the rough basic layout and the case it come in.

Length Width Height
2.500 " 1.625 " 0.800"

http://polycase.com/pdf/detailed/KT-35.pdf

copgtp · 04-19-2005

Bilal, the two circles on the top, with the squiggly lines in them, are those dials of some kind to adjust the alcohol??

dezldave961 · 04-20-2005

They look to be potentiometers (variable resistors being used as dials), one to set the boost level to initiate the pump, and the second to set the boost level when the pump is at full power. That's my guess anyhow.

Hope to see pics after Friday, thanks for the updates Bilal.

- Dave

NeilsGTP · 04-20-2005

The size of the controller looks like it will fit perfectly inside that goofy little compartment on the left hand side of the steering wheel in the dashboard.

Great design! :D

dmw16 · 04-27-2005

Quote:

I will give a $100 upgrade to the new Stage 2 controllers due out next month to all who have purchased a kit.

For Free?

VinnieMacGTP · 04-27-2005

Quote:

Originally Posted by dmw16 @ Wed Apr 27, 2005 9:41 am

Quote:

I will give a $100 upgrade to the new Stage 2 controllers due out next month to all who have purchased a kit.

For Free?

aw, is that the best you can do

ill more than likely be upgrading to stage 2 when its ready, but by the time my kit gets here, it may be almost ready. After that $100, and the spacer i added onto the kit from the first group buy, ill be pushing close to $400. just a little over what youre selling it for now. there isnt even a $100 difference in the kits on your site now.

some of us have been waiting a real long time while all this was getting setup. You could hook us up a little...

04-18-2005	#1 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Got ahold of KEN on the controllers (basic design pic added) Well finally he will have everything sent to me by Friday. It's been a long wait and I mean long for you guys. And I do apoligize but it's out of my hands until I get the controllers. I will give a $100 upgrade to the new Stage 2 controllers due out next month to all who have purchased a kit.

04-19-2005	#3 (permalink)
Timberwarp Water Injection Newb Join Date: Apr 2005 Posts: 8	Re: Got ahold of KEN on the controllers I can't wait to see the pics of the new controller, I am tempted to buy one but not til I see one first. ;)

04-19-2005	#4 (permalink)
NeilsGTP Water Injection Join Date: Apr 2005 Posts: 23	Re: Got ahold of KEN on the controllers Wow, thanks Bilal!!

04-19-2005	#5 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Re: Got ahold of KEN on the controllers Here's a few specs on the contoller this is the rough basic layout and the case it come in. Length Width Height 2.500 " 1.625 " 0.800" http://polycase.com/pdf/detailed/KT-35.pdf

04-20-2005	#7 (permalink)
dezldave961 Water Injection Newb Year: 1998 Make: Pontiac Model: Grand Prix GTP Daytona #838 Join Date: Apr 2005 Posts: 10	Re: Got ahold of KEN on the controllers (basic design pic added) They look to be potentiometers (variable resistors being used as dials), one to set the boost level to initiate the pump, and the second to set the boost level when the pump is at full power. That's my guess anyhow. Hope to see pics after Friday, thanks for the updates Bilal. - Dave __________________ '98 Daytona GTP - 333whp/329wtq - 2.9/16* - stock heads, no I/C or injection 12.78 @ 111.13 - 2.7/19* - spinning street tires www.mccgp.com

04-18-2005	#2 (permalink)
copgtp Water Injection Join Date: Apr 2005 Posts: 29	Bilal, you are my hero dammit!!! BILAL FOR PRESIDENTE!!!!!!!!!

04-19-2005	#6 (permalink)
copgtp Water Injection Join Date: Apr 2005 Posts: 29	Bilal, the two circles on the top, with the squiggly lines in them, are those dials of some kind to adjust the alcohol??

04-20-2005	#8 (permalink)
NeilsGTP Water Injection Join Date: Apr 2005 Posts: 23	Re: Got ahold of KEN on the controllers (basic design pic added) The size of the controller looks like it will fit perfectly inside that goofy little compartment on the left hand side of the steering wheel in the dashboard. Great design! :D

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Basic Alky Kit Upgradable? edit: another question!	OlsenG	Technical Questions	2	10-16-2005 11:57 AM
Differences between basic kit and Progressive kit?	dafaic	Technical Questions	4	09-28-2005 04:54 PM
New Items Added To Web Store 01JUN05	dvldoc	Technical Questions	8	06-01-2005 02:50 PM
Progressive Controller Install Directions Change Added (important)	NeilsGTP	Technical Questions	6	04-30-2005 12:06 AM