How do I get that blower-tb pin out??

NeilsGTP · 05-27-2005

I'm trying to install the TB spacer and I am having troubles getting that little pin out that is on the blower. Any ideas / tips on getting that thing out??

Thanks!
Neil

slopoke · 05-27-2005

Drill it

dvldoc · 05-27-2005

Locking needle nose pliers

NeilsGTP · 05-27-2005

I did the whole locking pliers bit, PB Blaster, tons of pulling, drilling the pin out. 15 minutes later I realized it was a lot easier to drill the aluminum! Problem solved

shaferz · 05-27-2005

Quote:

Originally Posted by NeilsGTP @ Fri May 27, 2005 1:52 pm

I did the whole locking pliers bit, PB Blaster, tons of pulling, drilling the pin out. 15 minutes later I realized it was a lot easier to drill the aluminum! Problem solved

LOL... I did about the same thing. I fought with it for 5 minutes and said fuck it. I just drilled another hole in the spacer.

Now if only my controller would get here.

pnkrckr · 05-27-2005

Me and my friend saw that little pin sticking out and we're like F pulling it out...we just took a hammer and tapped it back into the hole. That should help some people that don't want to drill or can't pull it out.

05-27-2005	#1 (permalink)
NeilsGTP Water Injection Join Date: Apr 2005 Posts: 23	How do I get that blower-tb pin out?? I'm trying to install the TB spacer and I am having troubles getting that little pin out that is on the blower. Any ideas / tips on getting that thing out?? Thanks! Neil __________________ http://www.cardomain.com/memberpage/819989

05-27-2005	#2 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: How do I get that blower-tb pin out?? Drill it

05-27-2005	#3 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Re: How do I get that blower-tb pin out?? Locking needle nose pliers

05-27-2005	#4 (permalink)
NeilsGTP Water Injection Join Date: Apr 2005 Posts: 23	Re: How do I get that blower-tb pin out?? I did the whole locking pliers bit, PB Blaster, tons of pulling, drilling the pin out. 15 minutes later I realized it was a lot easier to drill the aluminum! Problem solved __________________ http://www.cardomain.com/memberpage/819989

05-27-2005	#6 (permalink)
pnkrckr Water Injection Join Date: May 2005 Posts: 21	Re: How do I get that blower-tb pin out?? Me and my friend saw that little pin sticking out and we're like F pulling it out...we just took a hammer and tapped it back into the hole. That should help some people that don't want to drill or can't pull it out.