Info re Progressive Controller please

GTech · 08-24-2008

Yesterday whilst doing my install, I had need to split open the box that the houses the PCB for the controller. I noticed on the controller board, was handwritten in marker pen the number 3 (three),

does this by chance indicated 3bar map sensor

or is that just wishful thinking.

Thanks

Graeme

dvldoc · 08-24-2008

Yes it mean 3 bar or it's a voltage controller which are the same board.

2bfi · 09-20-2008

Does this mean if I want to convert my 2 bar Progressive Controller to a voltage controller, all I have to do is follow the instructions to switch it over to a 3 bar Progressive Controller?

Rocket468 · 09-22-2008

Yea, the 2 bar map sensor has a narrow output. 2.8v- 4.5v the 3 bar map sensors output is wider. 1.8v to 4.9 v These are numbers from aprox 1psi to the max of the sensor.

08-24-2008	#1 (permalink)
GTech Water Injection Newb Year: 1995 Make: Toyota Model: MR2 Turbo Join Date: Apr 2007 Posts: 12	Info re PROGRESSIVE CONTROLLER please Yesterday whilst doing my install, I had need to split open the box that the houses the PCB for the controller. I noticed on the controller board, was handwritten in marker pen the number 3 (three), does this by chance indicated 3bar map sensor or is that just wishful thinking. Thanks Graeme

08-24-2008	#2 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Re: Info re PROGRESSIVE CONTROLLER please Yes it mean 3 bar or it's a voltage controller which are the same board. __________________ Currently deployed to Ramadi 1 battalion 12th Marines Task Force MP

09-20-2008	#3 (permalink)
2bfi Water Injection Newb Year: 1999 Make: Honda Model: Civic Join Date: Jul 2008 Posts: 3	Re: Info re PROGRESSIVE CONTROLLER please Does this mean if I want to convert my 2 bar Progressive Controller to a voltage controller, all I have to do is follow the instructions to switch it over to a 3 bar Progressive Controller?

09-22-2008	#4 (permalink)
Rocket468 DevilsOwn Staff Year: 2000 Make: Pontiac Model: Grand Prix Join Date: Apr 2005 Posts: 1,126	Re: Info re PROGRESSIVE CONTROLLER please Yea, the 2 bar map sensor has a narrow output. 2.8v- 4.5v the 3 bar map sensors output is wider. 1.8v to 4.9 v These are numbers from aprox 1psi to the max of the sensor.