This is a discussion on "Kit finally installed!" within the Technical Questions forums. This forum, and the thread "Kit finally installed! "are both part of the General Performance category;
| | LinkBack | Thread Tools |
| | #1 (permalink) |
| Water Injection Join Date: May 2005
Posts: 23
|
The kit finally is in, I did some runs but not through the 2-3 shift yet. But I am sure after all those little problems it will be well worth it. Some concerns that I had with the kit (customer ease of use) I thought I would point out for your reference Bilal. I found it hard to find key terms in search engines such as the microcheck valve and other little things. 1. NO POWER DROP OBSERVED in 1997 cars. This would have helped me eliminate about an hour looking for the thing since I purchased the power drop connector that is useless to me now. 2. THE MICROCHECK VALVE location. I would say the illustrations I saw in the directions puzzled me until a post you did showing the illustration of the two that exist that you send in the kits. I was thinking I had to cut my line to the TB spacer and place it with zip ties when all I had to do was screw it in. Easy information not easy to locate (I think the pictures on both you and Chris' instructions were lacking there.) 3. Alternative wiring locations- I did find a pink wire under the steering wheel location, although I appreciate the picture you posted showing the access panel to the driver side, I was not and I believe you also were not aware of the differences in these model years. I believe the connections illustrated in my other post was from a 98 or newer model. 4. Nozzle into Teel TB spacer- This was just a miscommunication but none the less it was funny 4 of us attempting to get it right. Now I have a straight tube going into the spacer with the nozzle screwed in from the inside and on the other end I have the microcheck valve, then the "double male end" and then the line with fittings. Basically I feel just a little more effort into the directions for variations that exist would eliviate some problems for some installing the kit. I am sure that with the 2.9 pulley and alcohol along with the cam me and my friends just put in I will have my 12.X pass. But I thought that you would want the feedback from a good customer. Regards, Stephen Stockman 1997 GTX |
| | |
| Thread Tools | |
| |
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Finally got my kit together! | firemanGTP | Supercharged Engines | 2 | 07-16-2006 04:59 PM |
| Finally got Alky installed on my car :) 2k GTP | JuicedTeC | Supercharged Engines | 1 | 04-23-2006 08:09 AM |
| Got my kit installed finally | LGG | Technical Questions | 6 | 06-19-2005 04:20 PM |