Lights on controller ?

carlsgtp · 05-29-2005

What does the yellow and green light mean? I tried to use the search, but had no luck. I just got my controller back and when I floor it my yellow and green light come on. Does green mean the pump is spraying?

Carl

1badgtp · 05-29-2005

I believe it means you have a low current warning. It is a minor flaw in the controller and you need to do a simple 5 minute solder job.

http://www.devilsownonline.com/forum/viewtopic.php?t=71

dvldoc · 05-29-2005

No it's working just fine.

Red light shows power to the controller
Green shows start point of pump (pump is spraying) gets brighter as it ramps up
Yellow comes on solid when you hit the full set point all three LED's are lite when your at full psi.

Yellow will blink and turn off the system if there are any bad connections or problems with the pump. This let's you know to get out of the throttle.

carlsgtp · 05-29-2005

Cool, dvldoc, thanks for fixing it man.

Carl

05-29-2005	#1 (permalink)
carlsgtp Water Injection Newb Join Date: May 2005 Posts: 14	Lights on controller ? What does the yellow and green light mean? I tried to use the search, but had no luck. I just got my controller back and when I floor it my yellow and green light come on. Does green mean the pump is spraying? Carl __________________ http://home.columbus.rr.com/onequickl67/sig%20pic.jpg ZZP 3.4-2.7 K&N 1.9s w/ ls6 springs 104s slp headers 3 inch cat! ubend! DHP 1.5 w/ PT alcohol Gen V

05-29-2005	#2 (permalink)
1badgtp Water Injection Newb Join Date: Apr 2005 Posts: 4	Re: Lights on controller ? I believe it means you have a low current warning. It is a minor flaw in the controller and you need to do a simple 5 minute solder job. http://www.devilsownonline.com/forum/viewtopic.php?t=71

05-29-2005	#3 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Re: Lights on controller ? No it's working just fine. Red light shows power to the controller Green shows start point of pump (pump is spraying) gets brighter as it ramps up Yellow comes on solid when you hit the full set point all three LED's are lite when your at full psi. Yellow will blink and turn off the system if there are any bad connections or problems with the pump. This let's you know to get out of the throttle.

05-29-2005	#4 (permalink)
carlsgtp Water Injection Newb Join Date: May 2005 Posts: 14	Re: Lights on controller ? Cool, dvldoc, thanks for fixing it man. Carl __________________ http://home.columbus.rr.com/onequickl67/sig%20pic.jpg ZZP 3.4-2.7 K&N 1.9s w/ ls6 springs 104s slp headers 3 inch cat! ubend! DHP 1.5 w/ PT alcohol Gen V