Registration is free.
Join us today.
mounting the nozzel assembly ?
This is a discussion on "mounting the nozzel assembly ?" within the Technical Questions forums. This forum, and the thread "mounting the nozzel assembly ? "are both part of the General Performance category;
Devilsown Methanol Alcohol Water Injection
> General Performance
> Technical Questions 
mounting the nozzel assembly ?
 |
| | LinkBack | Thread Tools |
09-24-2008
| #1 (permalink) |
| Water Injection Year: 87 Make: pontiac Model: fiero  Join Date: Aug 2006
Posts: 29
|  mounting the nozzel assembly ?
Ive read most of the board and gone over the instructions and im sure i've missed it but..... how do you mount the nozzel to your pipe ? It cant be as simple as drilling a hole and pushing it in... so what is holding it in place ? picks would be awsum here lol thanks in advance oh btw im using 2.5" 304 stainless exhaust tubeing from the turbo to my throttle body
__________________ http://img409.imageshack.us/img409/8...tbacksm1qj.jpg best run 14.4 @ 96mph (non turbo) 84 Fiero Turbo Vortec 4300 Phantom GT L35 block, Syclone Intake and ECM T31 / T04B H3 Turbo Murphy's Constant Matter will be damaged in direct proportion to its value Murphy's Law of Thermodynamics Things get worse under pressure. Arthur C. Clarke "Any significantly advanced technology is indistinguishable from magic" |
|  |
|
09-24-2008
| #2 (permalink) |
| DevilsOwn Staff  Join Date: Apr 2005
Posts: 2,071
| Re: mounting the nozzel assembly ?
If your mounting it from the inside using the supplied neoprene bounded washer you just follow the directions on the drill bit size and push the nozzle through and screw it down into the nozzle holder. If your mounting it from the outside you need to tap the pipe with a 1/8npt thread.
__________________ Currently deployed to Ramadi 1 battalion 12th Marines Task Force MP  |
|
| |
