Registration is free.
Join us today.
Nozzle holder
This is a discussion on "Nozzle holder" within the Technical Questions forums. This forum, and the thread "Nozzle holder "are both part of the General Performance category;
Devilsown Methanol Alcohol Water Injection
> General Performance
> Technical Questions 
Nozzle holder
 |
| | LinkBack | Thread Tools |
09-11-2008
| #1 (permalink) |
| Water Injection Year: 1992 Make: TOYOTA Model: ARISTO TWIN TURBO Join Date: Aug 2008
Posts: 18
|  Nozzle holder
My kit did not come with the black 90 degree holder, it came with an instant fitting that the nozzle can screw into, kinda like the one pictured. Is this the correct one to use? It does sit quite high on the intake compared to the black 90 degree one.
|
|  |
|
09-12-2008
| #3 (permalink) |
| DevilsOwn Staff  Join Date: Apr 2005
Posts: 2,071
| Re: Nozzle holder
We have some new fittings, The 90 you have pictured is not it though, We change the design a bit and made it were you can swivel the direction of the hose. The check valves will all be tube to tube ends on those kits.
__________________ Currently deployed to Ramadi 1 battalion 12th Marines Task Force MP  |
|
| |
|
09-12-2008
| #4 (permalink) |
| Water Injection Year: 1992 Make: TOYOTA Model: ARISTO TWIN TURBO Join Date: Aug 2008
Posts: 18
| Re: Nozzle holder
Yes it is like the one on the right but has an extended female end to screw the nozzle into. So it's just an updated version with a quick connector and is plastic not brass.
|
|
| |
|
09-12-2008
| #5 (permalink) |
| DevilsOwn Staff Join Date: Apr 2005
Posts: 2,071
| Re: Nozzle holder
Yes the new fittings are different and they are made of Nylon. It eliminates a fitting and makes the nozzle holder one piece.
__________________ Currently deployed to Ramadi 1 battalion 12th Marines Task Force MP |
|
| |
