Nozzle size, location and air intake temp sensor

Underwhere · 02-24-2007

I'm considering meth and am fabbing up my intercooler piping now.
Can I get some recommendations on where to place the nozzle /nozzles?

The motor is an inline 6 cyl. 3 liter turbo running into the 20psi range with the methanol.

My questions:
The intake piping makes a 90 degree turn into the throttle body.
Where is the ideal nozzle placement?
Do I need multiple nozzles?
What size bung would I use? I have 1/8 NPT but I'm thinking these nozzles may be 1/16NPT?

Where is the ideal place to put the air intake temp sensor? I am thinking inside the intake manifold and slightly away from the throttle body so it doesn't get hit with water?

Rocket468 · 02-26-2007

You can put the nozzle anywhere between your ic outlet and your tb. Same with your Iat sensor they are pretty tolerant of meth. You going to want a 1/8npt bung. You going to want to use a thin one. Our nozzles only have a little over 1/4" reach. So if your bung is thicker you can get 1/16 by running a die down our nozzle.

That looks like a nice little setup you got going.

02-24-2007	#1 (permalink)
Underwhere Water Injection Newb Year: 2001 Make: Lexus Model: IS300 Turbo Join Date: Feb 2007 Posts: 1	Nozzle size, location and air intake temp sensor I'm considering meth and am fabbing up my intercooler piping now. Can I get some recommendations on where to place the nozzle /nozzles? The motor is an inline 6 cyl. 3 liter turbo running into the 20psi range with the methanol. My questions: The intake piping makes a 90 degree turn into the throttle body. Where is the ideal nozzle placement? Do I need multiple nozzles? What size bung would I use? I have 1/8 NPT but I'm thinking these nozzles may be 1/16NPT? Where is the ideal place to put the air intake temp sensor? I am thinking inside the intake manifold and slightly away from the throttle body so it doesn't get hit with water?

02-26-2007	#2 (permalink)
Rocket468 DevilsOwn Staff Year: 2000 Make: Pontiac Model: Grand Prix Join Date: Apr 2005 Posts: 1,126	Re: Nozzle size, location and air intake temp sensor You can put the nozzle anywhere between your ic outlet and your tb. Same with your Iat sensor they are pretty tolerant of meth. You going to want a 1/8npt bung. You going to want to use a thin one. Our nozzles only have a little over 1/4" reach. So if your bung is thicker you can get 1/16 by running a die down our nozzle. That looks like a nice little setup you got going.