[SLPGTP]

What seems to be the best for plug gaps? Just so I can eliminate any chance of missing. Thanks.

Aaron

[devilsownonline]

.035 to .045 with autolitte 103's. I do .050 when it's winter because I run a 3.25, alcohol and 87 octane. It rains damm near every day here in WA state in the winter time no need for speed.

[SLPGTP]

It's seeming to rain all the time in Nebraska these days too. Can't have the car stay clean for more than two days. lol

I'm running Autolite 104's right now. I thought maybe my plugs were what was giving me to goofy miss that I was experiencing so I got new ones and the parts store was out of NGK TR55s so I just went with these. Should I do 103's?

[dvldoc]

If you plan on running a 3.25 or lower go with 103's

[slopoke]

I agree.

[Ridin ON Chrome]

So, I guess 104s gapped at .50 with 3.25 pulley wont cut it?

[pnkrckr]

So, I guess 104s gapped at .50 with 3.25 pulley wont cut it?

Correct? If this is true I don't want to get 104's for a couple weeks and then be running either a 3.25 pulley or my 3.0 pulley and have to swap plugs again to the 103s if I can just go straight to the 103's once I get my smaller pullies on. thanks.

Also what gap are you people with the 103s using?

[SLPGTP]

Well right now I'm running a 3.0" and I plan on going to a 2.8" so I think I should be going a step hotter to the 103's huh?

[Ridin ON Chrome]

Originally Posted by SLPGTP @ Sun May 29, 2005 7:47 pm

Well right now I'm running a 3.0" and I plan on going to a 2.8" so I think I should be going a step hotter to the 103's huh?

103s are colder not hotter

[SLPGTP]

Yeah... I was sittin there watchin TV about 2 seconds after posting that and said... "wait a minute.. that's not right." And just didn't care to change it.