putting nozzle in throttle body spacer?? :(

GimpsGTP · 05-09-2005

obviously the nozzle end goes inside the spacer but from what way did you install middle piece that connectes the elbow and nozzle end. i started from the outside and was screwing it in that way and was a terribly hard time and the middle connector piece broke, what do i do now , theres a piece stuck in the spacer and i have a broken middle piece.
Nick

slopoke · 05-09-2005

See my install guide. If you broke the connector you will need a new one. good luck.

GimpsGTP · 05-09-2005

when you drilled out your spacer, did you just drill it or have it threaded also, mine was threaded when i got it, if you just drilled what size bit did u use?

slopoke · 05-09-2005

1 1/4 bit. the tube fit snugly.

vhall222 · 05-12-2005

Slopoke you mean a 1/4" bit right? 1-1/4 is huge.

slopoke · 05-12-2005

HAHA, your right. My bad....

Well at least you would have no possibilty of breaking off anything in that whole

mapex · 05-12-2005

Quote:

Originally Posted by slopoke @ Thu May 12, 2005 7:55 pm

HAHA, your right. My bad....

Well at least you would have no possibilty of breaking off anything in that whole

could always run a garden hose for those high psi pumps

[schild=18 fontcolor=DC143C shadowcolor=FFFFFF shieldshadow=1]muwahahahahaha[/schild]

slopoke · 05-13-2005

LOL

vhall222 · 05-21-2005

For the record, it is a 3/8 drill bit when drilling out the spacer.

05-09-2005	#1 (permalink)
GimpsGTP Water Injection Join Date: Apr 2005 Posts: 23	putting nozzle in throttle body spacer?? :( obviously the nozzle end goes inside the spacer but from what way did you install middle piece that connectes the elbow and nozzle end. i started from the outside and was screwing it in that way and was a terribly hard time and the middle connector piece broke, what do i do now , theres a piece stuck in the spacer and i have a broken middle piece. Nick

05-09-2005	#2 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: putting nozzle in throttle body spacer?? :( See my install guide. If you broke the connector you will need a new one. good luck.

05-09-2005	#3 (permalink)
GimpsGTP Water Injection Join Date: Apr 2005 Posts: 23	Re: putting nozzle in throttle body spacer?? :( when you drilled out your spacer, did you just drill it or have it threaded also, mine was threaded when i got it, if you just drilled what size bit did u use?

05-09-2005	#4 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: putting nozzle in throttle body spacer?? :( 1 1/4 bit. the tube fit snugly.

05-12-2005	#5 (permalink)
vhall222 Alcohol Injection Join Date: Apr 2005 Posts: 53	Re: putting nozzle in throttle body spacer?? :( Slopoke you mean a 1/4" bit right? 1-1/4 is huge.

05-12-2005	#6 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: putting nozzle in throttle body spacer?? :( HAHA, your right. My bad.... Well at least you would have no possibilty of breaking off anything in that whole

05-13-2005	#8 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: putting nozzle in throttle body spacer?? :( LOL

05-21-2005	#9 (permalink)
vhall222 Alcohol Injection Join Date: Apr 2005 Posts: 53	Re: putting nozzle in throttle body spacer?? :( For the record, it is a 3/8 drill bit when drilling out the spacer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How To Flush Mount Nozzle In Spacer	dvldoc	Technical Questions	21	05-24-2005 11:12 PM
Flush mount for the nozzle in the TB spacer	AdamZ82	Technical Questions	5	05-19-2005 01:33 PM