stock tb

blownprix99 · 08-11-2005

I've been reading here alot, and im about to order a kit. Do i HAVE to order a tb spacer? or can i tap into the stock tb? Thanks alot,
Eric

blownprix99 · 08-13-2005

Anyone? im installing kit on tuesday.

dvldoc · 08-13-2005

Go just be hind the MAF sensor, The air flow keeps it from getting wet.

blownprix99 · 08-16-2005

Thank you very much. How does the sprayer stay in there? Do you tap it and it screws in? sorry im very new at this.
Thanks,
Eric

dvldoc · 08-18-2005

The new kits come with a sealing rubber bonded stainless steel washer. You just screw the nozzle into the 90 degree elbow and your done. You'll use a 23/64" drill bit to make your hole.

08-11-2005	#1 (permalink)
blownprix99 Water Injection Newb Join Date: May 2005 Posts: 12	stock tb I've been reading here alot, and im about to order a kit. Do i HAVE to order a tb spacer? or can i tap into the stock tb? Thanks alot, Eric

08-13-2005	#2 (permalink)
blownprix99 Water Injection Newb Join Date: May 2005 Posts: 12	Re: stock tb Anyone? im installing kit on tuesday.

08-13-2005	#3 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Re: stock tb Go just be hind the MAF sensor, The air flow keeps it from getting wet.

08-16-2005	#4 (permalink)
blownprix99 Water Injection Newb Join Date: May 2005 Posts: 12	Re: stock tb Thank you very much. How does the sprayer stay in there? Do you tap it and it screws in? sorry im very new at this. Thanks, Eric

08-18-2005	#5 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 2,071	Re: stock tb The new kits come with a sealing rubber bonded stainless steel washer. You just screw the nozzle into the 90 degree elbow and your done. You'll use a 23/64" drill bit to make your hole.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2005 GTO LS2, stock motor + Maggie	Willow	Supercharged Engines	6	08-12-2006 08:57 PM
The Pump In Action This Is At 4 Turns From The Stock Setting	dvldoc	Technical Questions	1	06-07-2005 03:21 PM