Thanks Guys, info please

gsimpson · 04-23-2007

Hi Guys,

Well thanks for the speedy order to my Orlando Hotel whilst I was over there for a few day, fantastic service.

You may recall I got the "4 Quart" Tank. On the bottom it has like a flat bubble bit which is where I presume you insert the outlet..... question is, do you slice this off or drill it ??? if drill, what size do you recommend ??

Thanks

Graeme
(United Kingdom)

Devilsown · 04-24-2007

Its where they thicken the tank for putting a welded fitting in. We don't use this type of fitting. You can drill there with a 11/32 drill bit and run a 1/8npt tap into it and then run the supplied fitting into it.

04-23-2007	#1 (permalink)
gsimpson Water Injection Newb Year: 1995 Make: TOYOTA Model: MR2 Turbo Join Date: Apr 2007 Posts: 4	Thanks Guys, info please Hi Guys, Well thanks for the speedy order to my Orlando Hotel whilst I was over there for a few day, fantastic service. You may recall I got the "4 Quart" Tank. On the bottom it has like a flat bubble bit which is where I presume you insert the outlet..... question is, do you slice this off or drill it ??? if drill, what size do you recommend ?? Thanks Graeme (United Kingdom)

04-24-2007	#2 (permalink)
Devilsown DevilsOwn Staff Join Date: Aug 2006 Posts: 2	Re: Thanks Guys, info please Its where they thicken the tank for putting a welded fitting in. We don't use this type of fitting. You can drill there with a 11/32 drill bit and run a 1/8npt tap into it and then run the supplied fitting into it.