[seejay]

I just got my car back from having it shipped across the US. I went to test my new methanol mixture, and realized I was only getting a very, very dim yellow light (almost was not even on) and power light . I then tested the pump by disconnecting it from the controller and tapping a 12v source, and it worked fine. I then connected the pump back to the controller and tried jumping the the grey wire with the green wire (leaving it still connected to the map sensor) to see if I got all the lights, and still nothing happed just the red power light. I went to check the ground on the controller and noticed it was not connected, but the controller still showed the power light, (I thought it would not show pwr if the ground was not connected). I then connected the ground and still nothing. I sure my map sensor is fubared be cause my aeroforce gauge is still showing accurate boost readings.

Thanks, Cj

[Rocket468]

Yea, the controller not getting a ground can cause it to fry. Get me your email address either by email Chance@alcohol-injection.com or by pm so i can get you our info to send it to our tech to get fixed.

[seejay]

I sent in my controller last week, Let me know if you got it or not.

[Rocket468]

its not coming to us, its going to digital ken who does our controllers for us.

[seejay]

I have yet to hear back from anybody or anything. How do I know if digital ken received my controller or not? Is there any kind of contact for digital ken?

-thanks

[Rocket468]

You will get a call from him in afew days.