1/4 Mile Times

pacemkr86 · 02-23-2007

awesome run..

how often you go to SAR ?

sleeper7 · 02-23-2007

At least twice a month, try to go more when I can.

it's the white ugly 2nd gen rx7 with black tape on the front.
chuck

Rocket468 · 02-23-2007

SAR is a very fast track. That is where i always get my personal best at.

pacemkr86 · 02-23-2007

do you ever race at any of the Midnight Madness ?

sleeper7 · 02-23-2007

been to the last two MNM at SAR. This last one I raced for the import trophy, lost by .o68

Back-n-Black · 03-02-2007

13.5@106 SRT4 at the SRT Nationals in 110 degree heat running 100% VP meth.

Street tires, stock turbo, and the DVO kit. Looking for 12's on street tires easy this year.
Randy

Putter · 03-03-2007

13.3@104 Dodge Omni @ 16psi stock turbo. My trans exploded the next run whoops.

Lookin for low 12's this year new/trans, turbo, and fixed intercooling issues.

JasonZ31 · 07-05-2007

Last year I had a PB 1/4 time of 11.6 @ 126.6mph at Mid-michigan Motorplex

Tuned by myself on dynapack, dynoed best numbers of 453rwhp/484rwtq earlier last year at Monkey Wrench Racing.

car is ~3400lbs race weight. VG30ET engine, 3.0L, stock 7.8:1 bottom end. 24PSI, with a little 110 mixed in with a mostly full tank of 93 octane. 30 degrees of timing advance and 11.0 AFR's. This was a marginal tune at best, as the MAF was maxed out. Cam timing was accidently left advanced as I forgot to change it at the track, so who knows what that setup really would have done. It's quite different now... especially now that I have the water/meth injection, larger injectors, and a larger turbo installed.

trik396 · 07-05-2007

I'm nowhere near you guys but I should break into the 12's next time I head out. Of course my truck weighs 7740 lbs with me in it...

rrussell · 07-06-2007

My personal best so far is 11.5@119mph 18psi w/75shot N2o running pump gas on street tires.

93 TSI AWD Talon
6 bolt block w/2G pistons
ARP head studs
balance shaft eliminator kit
Forced Performance "Sleeper 16G Turbo"
ACT 2600lb clutch kit
680cc/min injectors
3" Magna flow exhaust
Devils Own Progressive H2o/meth kit running a 50/50 mix
Stock cams,SMIC and piping,2G BOV

Next time out I will increase boost to 28psi and a 125shot on VP C16
Going for 10's

02-23-2007	#11 (permalink)
pacemkr86 DevilsOwn Tech Year: 86 Make: Buick Model: T Type Join Date: Oct 2005 Posts: 644	Re: 1/4 Mile Times awesome run.. how often you go to SAR ?

02-23-2007	#12 (permalink)
sleeper7 Water Injection Newb Year: 87 Make: mazda Model: RX7 Join Date: Dec 2006 Posts: 8	Re: 1/4 Mile Times At least twice a month, try to go more when I can. it's the white ugly 2nd gen rx7 with black tape on the front. chuck

02-23-2007	#13 (permalink)
Rocket468 DevilsOwn Staff Year: 2000 Make: Pontiac Model: Grand Prix Join Date: Apr 2005 Posts: 1,126	Re: 1/4 Mile Times SAR is a very fast track. That is where i always get my personal best at.

02-23-2007	#14 (permalink)
pacemkr86 DevilsOwn Tech Year: 86 Make: Buick Model: T Type Join Date: Oct 2005 Posts: 644	Re: 1/4 Mile Times do you ever race at any of the Midnight Madness ?

02-23-2007	#15 (permalink)
sleeper7 Water Injection Newb Year: 87 Make: mazda Model: RX7 Join Date: Dec 2006 Posts: 8	Re: 1/4 Mile Times been to the last two MNM at SAR. This last one I raced for the import trophy, lost by .o68

03-02-2007	#16 (permalink)
Back-n-Black Water Injection Newb Join Date: Dec 2005 Posts: 4	Re: 1/4 Mile Times 13.5@106 SRT4 at the SRT Nationals in 110 degree heat running 100% VP meth. Street tires, stock turbo, and the DVO kit. Looking for 12's on street tires easy this year. Randy

03-03-2007	#17 (permalink)
Putter Water Injection Newb Join Date: Oct 2005 Posts: 10	Re: 1/4 Mile Times 13.3@104 Dodge Omni @ 16psi stock turbo. My trans exploded the next run whoops. Lookin for low 12's this year new/trans, turbo, and fixed intercooling issues.

07-05-2007	#18 (permalink)
JasonZ31 Water Injection Newb Year: 1984 Make: Nissan Model: 300ZX Turbo Join Date: Jul 2007 Posts: 11	Re: 1/4 Mile Times Last year I had a PB 1/4 time of 11.6 @ 126.6mph at Mid-michigan Motorplex Tuned by myself on dynapack, dynoed best numbers of 453rwhp/484rwtq earlier last year at Monkey Wrench Racing. car is ~3400lbs race weight. VG30ET engine, 3.0L, stock 7.8:1 bottom end. 24PSI, with a little 110 mixed in with a mostly full tank of 93 octane. 30 degrees of timing advance and 11.0 AFR's. This was a marginal tune at best, as the MAF was maxed out. Cam timing was accidently left advanced as I forgot to change it at the track, so who knows what that setup really would have done. It's quite different now... especially now that I have the water/meth injection, larger injectors, and a larger turbo installed. __________________ 84 Z31 300ZX - 453rwhp/484rwtq http://www.redz31.com http://www.z31performance.com http://www.vg30et.com http://www.z31parts.com

07-05-2007	#19 (permalink)
trik396 Water Injection Year: 2005 Make: Dodge Model: RamCTD Join Date: May 2007 Posts: 16	Re: 1/4 Mile Times I'm nowhere near you guys but I should break into the 12's next time I head out. Of course my truck weighs 7740 lbs with me in it...

07-06-2007	#20 (permalink)
rrussell Alcohol Injection Year: 1993 Make: eagle talon Model: TSI AWD Join Date: Jun 2007 Posts: 31	Re: 1/4 Mile Times My personal best so far is 11.5@119mph 18psi w/75shot N2o running pump gas on street tires. 93 TSI AWD Talon 6 bolt block w/2G pistons ARP head studs balance shaft eliminator kit Forced Performance "Sleeper 16G Turbo" ACT 2600lb clutch kit 680cc/min injectors 3" Magna flow exhaust Devils Own Progressive H2o/meth kit running a 50/50 mix Stock cams,SMIC and piping,2G BOV Next time out I will increase boost to 28psi and a 125shot on VP C16 Going for 10's __________________ 93 Talon TSI AWD 11.5@119mph 18psi 75shot 6 Bolt-JMTuning Engine/Trans Forced Performance Turbo "Sleeper 16g" 68 Camaro Street Car 523 BBC Pro Race Fogger nitrous system 9.14@152mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1/4 Mile Times	dvldoc	Supercharged Engines	8	12-03-2007 12:33 PM
What sort of times to expect with the following mods?	shaferz	Technical Questions	1	08-03-2005 08:34 PM