[rustrocket92]

I am in the works of turbocharger a 1.9 liter 93 ford escort. I am replacing the stock engine with a 97 ford 2.0 liter 4 cylinder. I am going to use a mitsubishi 14b turbo from an eclipse. I am looking for your recommendation on which kit and nozzle size would best suit my application. I am planning on starting around 6 to 8psi of boost with slightly larger injectors, small intercooler, and a 12-1 fmu.
Thanks Rustrocket

[dvldoc]

Originally Posted by rustrocket92

I am in the works of turbocharger a 1.9 liter 93 ford escort. I am replacing the stock engine with a 97 ford 2.0 liter 4 cylinder. I am going to use a mitsubishi 14b turbo from an eclipse. I am looking for your recommendation on which kit and nozzle size would best suit my application. I am planning on starting around 6 to 8psi of boost with slightly larger injectors, small intercooler, and a 12-1 fmu.
Thanks Rustrocket

Base kit with a 2-10 psi presssure switch and M3 nozzle for a base kit

If you go progressive 2 bar controller. You will need a 2 bar map sensor to go along with it.