Registration is free.
Join us today.
New user of your product
This is a discussion on "New user of your product" within the Turbocharged Engines forums. This forum, and the thread "New user of your product "are both part of the Engine Specific category;
Devilsown Methanol Alcohol Water Injection
> Engine Specific
> Turbocharged Engines 
New user of your product
 |
| | LinkBack | Thread Tools |
09-27-2005
| #1 (permalink) |
| Alcohol Water Injection Year: 1998 Make: GMC Model: Sonoma  Join Date: Sep 2005
Posts: 60
 |  New user of your product
I just purchased a Progressive Controller kit(3 bar map)to use on my turbo project. I'm putting together a 1998 GMC ext. cab Sonoma with a t3/t4 hybrid turbo. Later on I'll be installing a modified Edelbrock# 2114 intake manifold adapted for mpfi along with 65# injectors plus a bigger Turbonetics 62-1. I'm using a fully built 4.3l V6 Vortec engine. Hoping to make between 300~350hp with stock intake manifold(19# injectors)with the t3/t4 and between 400~450hp with the Edelbrock intake and bigger 62-1 turbo. I'll be tuning my stock computer using the TunerCat software. Will be checking in frequently here for help with the alcohol kit. PEACE>Tony
Last edited by Turbonoma; 01-16-2007 at 09:16 PM. |
|  |
|
10-04-2005
| #2 (permalink) |
| Alcohol Water Injection Year: 1998 Make: GMC Model: Sonoma Join Date: Sep 2005
Posts: 60
| Re: New user of your product
Got my progressive kit today. Looking foward to making some awsome power with it. Will be checking in for help and progress. PEACE>Tony
__________________ TURBOS SUCK |
|
| |
|
10-18-2005
| #4 (permalink) |
| Alcohol Water Injection Year: 1998 Make: GMC Model: Sonoma Join Date: Sep 2005
Posts: 60
| Re: New user of your product
I've installed the pump and I'm working on the wiring. Had to ask Bilal for an angled nozzle holder to locate the nozzle properly. This thing should be ready to fire up very soon. My avatar is my new converted Edelbrock mpfi intake with 65#injectors. PEACE>Tony 
__________________ TURBOS SUCK Last edited by Turbonoma; 01-16-2007 at 09:17 PM. |
|
| |
|
10-18-2005
| #7 (permalink) |
| Alcohol Water Injection Year: 1998 Make: GMC Model: Sonoma Join Date: Sep 2005
Posts: 60
| Re: New user of your product The choke hole on the 96 and up 4.3l engine is that the stock intake manifold does not permit changing the injectors which are set at 19#. The Edelbrock#2114 intake is ment to be used with a carb. A good friend of mine decided to try and make it into a mpfi unit and has succeeded in doing so. Right now he has one working on a n/a engine. The numbers are not very big but the manifold is ment to be used in a forced induction senario which will make more power. My setup will be the testbed for the next fase.Once I get the engine running and tuned a little, I'll then install the manifold and go from there. With my present setup, I hope to make over 350hp and maybe more now that I've installed the alcohol kit. "Houston we have a go" PEACE>Tony
__________________ TURBOS SUCK |
|
| |
|
10-18-2005
| #8 (permalink) |
| Alcohol Water Injection Year: 1998 Make: GMC Model: Sonoma Join Date: Sep 2005
Posts: 60
| Re: New user of your product
Here's a pic of the one on the n/a engine. The owner is very happy with the results so far. The truck has remained very streetable and just needs a little more tweaking.
__________________ TURBOS SUCK |
|
| |
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Product Review - New Devils Own Hose and Fittings | widowmaker | Technical Questions | 3 | 09-20-2005 07:36 PM |
All times are GMT -5. The time now is 02:57 PM.
