Registration is free.
Join us today.
New To Wi Install
This is a discussion on "New To Wi Install" within the Turbocharged Engines forums. This forum, and the thread "New To Wi Install "are both part of the Engine Specific category;
Devilsown Methanol Alcohol Water Injection
> Engine Specific
> Turbocharged Engines 
New To Wi Install
 |
| | LinkBack | Thread Tools |
02-16-2008
| #1 (permalink) |
| Water Injection Newb Year: 1991 Make: mazda Model: miata Join Date: Feb 2008
Posts: 3
|  New To Wi Install Hello everyone im new to this whole WI thing but i have a 91 turbo miata running 8psi just for background info so my ?'s are the placement of the nozzle and how to mount nozzle first off my iat sensor is about 10" away from the throttle body so should i put the nozzle before or between? if so where exactly and i want to use the inside mount nozzles because they seem like there easier to fit in tight places i have the nozzle holder already i just dont see how they stay in place on a vertical surface???? |
|  |
|
02-16-2008
| #2 (permalink) |
| DevilsOwn Staff  Join Date: Apr 2005
Posts: 1,884
| Re: New To Wi Install The nozzle can go either location, If you want your ECM to actually see the temp drop and add timing put the nozzle before the IAT sensor if you have a means to adjust your timing you can put it after. Either location works fine. The nozzle head and the bonded neoprene washer hold against the inside of the pipe and the nozzle holder on the outside of the pipe sandwich the two together. 
__________________ Deploying to Iraq Aug 2008  |
|
| |
