This product page is for"Self Sealing Float Switch" which are manifactured by DevilsOwn Injection and are in the catagory Water Injection Parts.
This Self Sealing Float Switch can easily be mounted in your tank. You just drill a 7/8"hole and slip it threw. Then just tighten the attached nut to provide a leak free seal. Others on the market need to be dropped in from the fill hole and then use a nut to tighten it to the tank. This is simply the easiest on the market to install.
Can be used with our controller as a warning system. Connect this level switch to the chassis ground with one of it's wires and the other to the pumps ground wire. When the level drops the fault light on the controller will activate when the system sees your start point of boost. This can also be wired to an led light.
Design Features：
Design Specs：
