Water Injection » SRT-4 Stage 2
SRT-4 Stage 2
Click to enlarge

  • SRT-4 Stage 2

  • Sku: [5111]
  • Retail: See Below
  • Shipping: Add to cart

This product page is for"SRT-4 Stage 2" which are manifactured by DevilsOwn Injection and are in the catagory SRT-4.

DevilsOwn Alcohol Injection designed a system just for the Dodge SRT-4. This is for the person who wants to have full control of their alcohol/water injection needs and is a owner of a Dodge SRT-4.

The DevilsOwn Progressive alcohol/water injection systems main function is to suppress detonation caused by high temperature and pressure developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Compressed air is heated air that causes power robbing and engine destroying detonation.

Cool the air with the DevilsOwn alcohol/water injection system! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burn engines. Methanol, with its 116 octane, high flash point and specific gravity, further reduces the chances of detonation.

Designed specifically for those who want to use their existing windshield wiper fluid tank located in your engine bay or have provided your own tank. It is provided with 15ft of nylon tubing, more can be purchased from our store if mounting the tank in the trunk is needed. This system comes with hardware, electrical connectors, and all the fittings needed to install this system.

Benefits Of Water/Methanol Injection:

  • Increase horsepower safely by 10-15%
  • Lower air temperatures by 50-200+ degrees
  • Increases octance when you need it under boost.
  • Reduces cylinder temperatures up to 300+ degrees
  • No wear issues only clean combustion chambers
  • Allows you to safely run more boost and timing

System Contents Include:

  • Completely adjustable digital progressive controller
  • 250 psi pump with EPDM seals
  • Heavy duty nickel plated check valve
  • 15 ft of black high pressure nylon tubing
  • 2 Nickel plated nozzles DO3,DO5
  • All necessary hardware

Important Notes:

  • Requires only basic hand tools to install with the exception of a 1/8 NPT tap
  • Proper tuning is required to achieve maximum results
  • Installation time approx. 2-3 hours

Warranty:

DevilsOwn Injection stands behind there parts and warrants this system free of defects for up to 1 year after purchase. Refer to our warranty page for complete details.

       2.5 Bar Controller
Click to enlarge

Progressive Controller dvl-2001

The electronic progressive controller represents the latest technology in water/methanol system control. The dvl-2001 is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire.

Alcohol-WaterInjection Pump
Click to enlarge

250 psi Alcohol-Water Pump

  • Long lifetime, 10+ Millions cycles
  • No lost in pressure even with high volumes
  • Dry run up to 1 hour
  • Methanol-compatible
  • EPDM Diaphragm High Volume pump
  • 150 to 250psi Output
Nozzle Assembly
Click to enlarge

Misting Nozzle

Unsurpassed atomization due to superior nozzle design. Consistently delivers superior, long-lasting, trouble-free performance. Intergrated O-ring for leak free seal.

SRT-4 Stage 2 - 2 Bar Controler
Click to enlarge
2 Bar Controler
for Stage 0-1 pcm
 $360.00 

Qty:

SRT-4 Stage 2 - 3 Bar Controler
Click to enlarge
3 Bar Controler
for Stage 2-3 pcm
 $360.00 

Qty:

Universal Stage 1 SRT-4 Universal Stage 1