3800 Stage 2

Devilsown Water Alcohol Injection kit just for L67-L36 equipped vehicles. This is for the Grand Prix, Buick Regal, Camaro, and Firebird owner who wants to have full control of their Alcohol/water injection needs. This kit will also work on GM new 2.0L Cobalt SS. Basicly this is intended for anything with a eaton supercharger. Where you will be using a T.b. spacer for spraying the water/alcohol mixture.

The DevilsOwn Progressive alcohol/water injection kit's main function is to suppress detonation caused by high temperature and pressure developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Compressed air is heated air that causes power robbing and engine destroying detonation.

Cool the air with the DevilsOwn alcohol/water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burn engines. Methanol, with its 116 octane, high flash point and specific gravity, further reduces the chances of detonation.

Designed specifically for those who want to use their existing windshield wiper fluid tank located in your engine bay or have provided your own tank. So it provided with 15ft of nylon tubing, more can be purchased from our store if mounting the tank in the trunk if needed. This kit comes with hardware, electrical connectors, and fittings need to install this kit.

Benefits Of Water/Methanol Injection: Allows you to run safely more boost and/or more timing Reduce the intake charge temperature up to 50°F-200°F, results in a denser more powerful air/fuel charge Perfect for cars with thermal problems and prior tuned cars No loss of boost as with a inter cooler No wear issues only clean combustion chambers Reduce the specific fuel consumption 1 years full warranty   System Contents Include: Completely adjustable digital progressive controller 150 psi Shurflo pump with EPDM seals for up to 50% methanol Heavy duty nickel plated check valve 15 ft of black high pressure nylon tubing 2 Nickel plated nozzles 3,5 All necessary hardware

Progressive Controller dvl-2001 The electronic progressive controller represents the latest technology in Water/Methanol system control. The dvl-2001 is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire. Shurflo Alcohol/Water Pump Long lifetime, 10+ Millions cycles No lost in pressure even with high volumes Dry run up to 1 hour Methanol-compatible EPDM Diaphragm High Volume pump 150PSI Output Misting Nozzle Usurpassed atomization due to superior nozzle design. Consistently deliver superior, long-lasting, trouble-free performance. Intergrated O-ring for leak free seal